ICD-P630F GB 3-295-271-11 (1)
12
GB
3 Set the time.
Press – or + to select the
digits of the hour.
Press PLAY/ENTER.
The minute digits will ash.
Set the minute.
Press PLAY/ENTER at the time
signal.
The display will return to “SET DATE.”
Press (stop) to exit from the menu
mode.
If the unit is left unused for more
than 3 seconds in the stop mode, the
display will show the current time.
Tips
This unit does not have a power on/off
switch. The display is shown at all times.
You can select the 12-hour display using the
menu. To set the 12-hour display, select “12H”
in the “HOUR” menu. In that case, “AM12:00”
will appear in step 2-.
To Next Page
Loading...
