Sony ICF-C212 - Power Cord Installation; Pointer Installation

ICF-C212
6
INSTALLATION POWER CORD
POINTER INSTALLATION
Cabinet (lower)
Power cord
Wind the power cord to the boss twic
e
2 Turn RV1 fully in the
arrow direction.
1 Turn the shaft of CV1
fully in the arrow direction.
5 Turn the knob (VOL)
fully in the arrow direction
A to be the warking
between arrows
A and B .
3 Pointer
4 Knob (tune)
6
Main board
Cabinet (lower)
Marking
CV1
B
A
RV1
RV1
Knob (VOL)