Sony ICP-3000 - Page 14

1-8 (E)
ICP-6520/6530/3000/6511
6. Secure the control panel to the control console with the
screws.
Number of screws
ICP-6530, ICP-3000: 6 pcs
ICP-6520: 4 pcs
7. Attach the cap (SW) with the screw.
n
When attaching the cap, be careful not to allow the
harness to be slackened in the portion A.
4. Remove the screw, then slowly move the cap (SW) in
the direction of the arrow.
5. Remove the screws, then remove the cap (L) and cap
(R) in the direction of the arrows.
Cap (SW)
PSW3 x 8
Cap (SW)
Cap (L)
Cap (R)
PSW3 x 8
PSW3 x 8
B4 x 6
B4 x 6
PSW3 x 8
Cap (SW)
A
Harness
Cap (SW)