Sony ICP-3000 - Periodic Inspection and Maintenance; Periodic Inspection; Cleaning

2-2 (E)
ICP-6520/6530/3000/6511
2-2. Periodic Inspection and Maintenance
2-2-1. Periodic Inspection
The following parts require periodic maintenance.
Refer to the period indicated in the following list for maintenance.
Part Where used Maintenance Suggested period
Fan Side on the bottom of the Cleaning Once in a month
ICP-6520/6530/3000 Replacement Once in about five years
Track ball Panel surface of the ICP-6520/6530/3000 Cleaning Once in a month
Backup capacitor The CA-86 board (BT0201) in the Replacement Once in about five years
ICP-6520/6530/3000B
Power supply unit Bottom side of the ICP-6520/6530/3000 Replacement Once in about five years
2-2-2. Cleaning
Cleaning for control panel
Wipe the control panel, switches, and faders with a dried cleaning cloth.
Use a cleaning cloth moistened with water or lukewarm water for persistent stain.
n
Be sure to use a wrung cloth for wiping the control panel since water droplet causes the malfunction.
Do not use any chemical, solvent, or cleaner, or wipe it hard to avoid damaging it.
Fan
The inside of the ICP-6520/6530/3000 is cooled by a fan (side on the rear).
If dust has accumulated in the intake of the fan, air is prevented from flowing smoothly and this may
result in a temperature rise inside the machine. This may have an adverse effect on performance and life
of the machine.
Cleaning of the fan every month is recommended.
Contact your local Sony Sales Office/Service Center for information cleaning the fan.
Air intake
Fan
Air flow