Sony ICP-3000 - Removing the Module

1-34 (E)
ICP-6520/6530/3000/6511
1-11. Removing the Module
n
The removal procedure of the module is the same for all models.
1. Remove the module covers on both sides.
2. Release the lock lever by pushing it in the direction of the arrow B using a flat screwdriver while
pushing the portion A of the module.
n
The module can be removed when either one of the right and left lock levers is released.
3. Remove the module in the direction of the arrow C.
n
The module is connected with the two harnesses. Therefore, when removing the module, lift it up
slowly.
Module
Lock lever
Portion A
Flat screwdriver
B
C
Module Module
Module cover
Module cover