Change aspect ratio horizontally
Change aspect ratio vertically
Change aspect ratio horizontally
and vertically at the same time
When the [KEY ADJ] button is held down, holding down
the button for the selected key together returns the key
settings to the initial status settings.
For details about initial status,
1
“Saving User-Defined
Settings” (p. 317).
Resizer
Resizer allows you to apply effects such as image
shrinking, magnification and movement, rotation as well
as change of the aspect ratio, to the processed key.
You can use the following operations.
•
Two-dimensional transformations of keys (
1
p. 95)
•
Key rotation on the X- or Y-axis
•
Resizer interpolation settings (
1
p. 96)
•
Resizer crop/border settings
(
1
p. 97)
•
Resizer effect settings
(
1
p. 98)
(mosaic, defocus)
Notes
16:9 screen including the added video on the left and right
sides. Use the crop function as required to extract the 4:3
image.
Menu operations for key shrinking,
magnification, rotation, and movement
As an example, for key 1 of the M/E-1 bank, use the
following procedure.
1
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
2
Adjust the following parameters.
Parameter group [1/2]
Parameter group [2/2]
MVS-6520/6530/3000A
•
Resizer can only be used for keys 1 and 2 (DSK1 and
DSK2 for the PGM/PST bank).
•
The image of the key manipulated by resizer has a one-
frame delay.
•
Some effects of resizer are different from what you
would expect of DME effects.
•
There are restrictions on combined use of resizer effects
themselves and that with DME wipes.
•
You cannot apply DME effects to a key for which the
resizer function is enabled. When one of the three
functions – resizer, DME wipe, and DME effects – is
enabled, the other two are disabled.
MVS-3000
•
Resizer can only be used for keys 1 and 2 (DSK1 and
DSK2 for the PGM/PST bank).
•
The image of the key manipulated by resizer has a one-
frame delay.
•
Some effects of resizer are different from what you
would expect of DME effects.
•
DME wipes cannot be simultaneously used on keys
where resizer is enabled.
Two-Dimensional Transformations
and Rotation of Keys
When [Rotation Enable] is turned on, the parameters
change as follows.
a)
[X] is turned on in the <Rotation> group.
b)
[Y] is turned on in the <Rotation> group.
Notes
When [Rotation Enable] is turned on, the movement
range of the center of the image is limited to the top
and bottom edges of the image frame.
Notes
When the screen aspect ratio is 4:3 in HD format, when the
resizer is used to shrink a video image, this is applied to the
To Next Page
Loading...
