GB
68
Shooting and viewing images
Shooting still images
In [Auto Mode], the camera analyzes the subject and allows you to shoot
with the appropriate settings.
1 Set the power switch to ON to turn on the camera.
2 Set the mode dial to
(Auto Mode).
• Turn the mode dial while pressing
the mode dial lock release button on
the center of the mode dial.
3 Look into the viewfinder and hold the camera.
4 Determine the size of a subject.
When using a lens with a zoom lever:
Move the zoom lever.
When using a lens with a zoom ring:
Turn the zoom ring.
• The optical zoom is not available when
a fixed focal length lens is mounted.
• If the zoom range of the optical zoom is
exceeded when a Power zoom lens is
mounted, the camera automatically
switches over to the zoom other than
the optical zoom.
Zoom ring
To Next Page
Loading...
