EasyManua.ls Logo

Sony ILCE7SM2/B - Page 83

Sony ILCE7SM2/B
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the various functions
Various functions
GB
83
Notes
Use the [ Silent Shooting] function on your own responsibility, while taking
sufficient consideration to the privacy and portrait rights of the subject.
Even if [ Silent Shooting] is set to [On], it will not be completely silent.
Even if [ Silent Shooting] is set to [On], the operating sound of the aperture and
focus will sound.
When shooting still images using the [ Silent Shooting] function with low ISO
sensitivity, if you point the camera at a very bright light source, high intensity areas
on the monitor may be recorded in darker tones.
When the power is turned off, the shutter sound may beep in rare occasions. This is
not a malfunction.
Image distortion caused by the movement of the subject or the camera may occur.
If you shoot images under instantaneous lightning or flickering lights, such as the
flash light from other cameras or fluorescent lighting, a striping effect may occur on
the image.
If you want to turn off the beep that sounds when the subject is in focus or the self-
timer operates, set [Audio signals] to [Off].
Even if [ Silent Shooting] is set to [On], the shutter sound may beep under the
following circumstances:
[White Balance] is set to [Custom Setup]
[Face Registration]
You cannot select [ Silent Shooting] when the mode dial is set to other than P/A/
S/M.
When [ Silent Shooting] is set to [On], the following functions are not available:
Flash shooting/Auto HDR/Picture Effect/Picture Profile/Long Exposure NR/e-Front
Curtain Shut./S. Auto Img. Extract./BULB shooting/Multi Frame NR
When shooting using a function downloaded from PlayMemories Camera Apps,
[ Silent Shooting] is canceled.
The minimum value for ISO sensitivity is ISO 100.
After you turn the camera on, the time in which you can start recording is extended
by 0.5 seconds.

Table of Contents

Related product manuals