Need help?Do you have a question about the Sony IPELA SNC-CH220 and is the answer not in the manual?
General| Audio Support | Yes |
|---|---|
| Resolution | 1920 x 1080 |
| Video Compression | H.264, JPEG |
| Frame Rate | Up to 30 fps at 1920 x 1080 |
| Audio Compression | G.711, G.726 |
| Audio Input/Output | Mini jack (3.5 mm diameter)/Mini jack (3.5 mm diameter) |
| Ethernet | 10BASE-T/100BASE-TX |
| Power Supply | IEEE 802.3af (PoE) compliant |
| Power Consumption | Max. 6.0 W |
| Operating Temperature | -10°C to +50°C (14°F to +122°F) |
| Day/Night | Yes |
Lists the key capabilities and specifications of the network camera.
Provides guidance on how to navigate and utilize the manual effectively.
Details the necessary computer hardware and software for optimal camera operation.
Step-by-step guide for setting up the camera's network IP address.
Instructions on how to connect to and view the camera via a web browser.
Recommended initial settings for camera configuration after installation.
Explains user roles and their respective access rights and functions.
Procedures for accessing the camera's interface as a user or administrator.
Overview of available viewer types and their functionalities.
Details on the main viewer interface and its various controls and settings.
Introduction to the administrator menu and how to navigate its options.
Settings related to system parameters, date/time, and general configuration.
Adjusts image quality, color, exposure, and codec settings for optimal video output.
Manages network connection settings, including IP, DNS, and QoS.
Configures secure communication protocols (SSL/TLS) for enhanced data protection.
Sets up wired network authentication using the 802.1X standard.
Manages user accounts, passwords, and access privileges for the camera.
Configures access control policies based on network addresses or subnets.
Allows saving and recalling specific camera pan, tilt, and zoom positions.
Configures settings for sending captured images via email.
Sets up the transfer of captured images to an FTP server.
Controls camera alarm outputs based on detection events or timers.
Defines actions to be performed when specific buttons are pressed on the viewer.
Configures time-based schedules for various camera functions.
Configures event detection for sensor input, camera tampering, and motion.
Customizes the viewer interface, layout, and display options.
Explains the functionalities of the SNC toolbox utility for device management.
Describes how to upload and use custom homepages for the camera interface.
Details the process of updating the camera's firmware using the SNC toolbox.
Explains how to schedule tasks such as device settings or firmware upgrades.
Provides a cross-reference to device settings configuration within the SNC toolbox.
Alternative method for assigning IP addresses without the SNC toolbox.
Covers network monitoring and management using the SNMP protocol.
To Next Page
