Do you have a question about the Sony Ipela SNC-WR630 and is the answer not in the manual?
High-quality Full HD (1080P) real-time monitoring, up to 60 fps.
Lists the necessary computer environment for displaying camera images and controls.
Step-by-step instructions for securing the camera against unauthorized access, including network address and SSL setup.
Instructions for logging in as a user and details on available viewers like ActiveX and plug-in free.
Explains the main menu, control panel section, and monitor image section of the live viewer.
Covers capture, video saving, volume, mic, camera control panel functions (pan/tilt, zoom, focus), panorama, and preset panels.
Explains the monitor image display, including plug-in free viewer and monitor screen operation modes.
Describes the control bar and camera operation modes (Area zoom, Vector dragging, PTZ Control bar) and controlling via the control panel.
Details zoom control, panning/tilting by specifying areas, clicking the image, and dragging the screen.
Moving the camera to preset positions and controlling the camera on a panorama image.
Changing the transmission mode for video/audio data between TCP, Unicast, and Multicast.
Overview of the Administrator menu and how to set up and use it for camera configuration.
Covers rebooting, factory defaults, memory card formatting, backing up, and restoring settings.
Enables hiding images by masking specified parts, including setting masks and their properties.
Sets user names, passwords, and viewer modes for Administrator and up to nine users.
Configures the SSL/TLS function for secure camera communication with client PCs.
Configures wired port-based authentication using the 802.1X standard, including client certificates.
High-quality Full HD (1080P) real-time monitoring, up to 60 fps.
Lists the necessary computer environment for displaying camera images and controls.
Step-by-step instructions for securing the camera against unauthorized access, including network address and SSL setup.
Instructions for logging in as a user and details on available viewers like ActiveX and plug-in free.
Explains the main menu, control panel section, and monitor image section of the live viewer.
Covers capture, video saving, volume, mic, camera control panel functions (pan/tilt, zoom, focus), panorama, and preset panels.
Explains the monitor image display, including plug-in free viewer and monitor screen operation modes.
Describes the control bar and camera operation modes (Area zoom, Vector dragging, PTZ Control bar) and controlling via the control panel.
Details zoom control, panning/tilting by specifying areas, clicking the image, and dragging the screen.
Moving the camera to preset positions and controlling the camera on a panorama image.
Changing the transmission mode for video/audio data between TCP, Unicast, and Multicast.
Overview of the Administrator menu and how to set up and use it for camera configuration.
Covers rebooting, factory defaults, memory card formatting, backing up, and restoring settings.
Enables hiding images by masking specified parts, including setting masks and their properties.
Sets user names, passwords, and viewer modes for Administrator and up to nine users.
Configures the SSL/TLS function for secure camera communication with client PCs.
Configures wired port-based authentication using the 802.1X standard, including client certificates.
| Camera Type | PTZ |
|---|---|
| Effective Pixels | Approx. 2.14 Megapixels |
| Maximum Resolution | 1920 x 1080 |
| Optical Zoom | 30x |
| Digital Zoom | 12x |
| Pan Range | 360° endless |
| Video Compression | H.264, MPEG-4, JPEG |
| Alarm Input/Output | 2/2 |
| Network Interface | 10BASE-T/100BASE-TX (RJ-45) |
| Wireless | No |
| Ingress Protection | IP66 |
| Image Sensor | 1/2.8" Exmor CMOS |
| Focal Length | 4.3 mm to 129 mm |
| Day/Night | Yes |
| Wide Dynamic Range | View-DR |
| Frame Rate | 30 fps (1920x1080) |
| Audio Compression | G.711, G.726 |
| Audio Input/Output | 1 input/1 output |
| Power Supply | AC 24V, PoE+ |
| Operating Temperature | +50°C |











