10
※
Installation example of wrist-strap
Please connect the clip to the metal part of the chassis of the TV with the
wristband grounded.Below is a grounding example of each model.
<
K*-55/65A9F
>
<
K*-65Z9F
>
※
Caution
ESD wrist-strap to be checked daily.
Use Multi-meter to make sure resistance of ESD wrist-strap is
OK.(R=750K Ohms to 35Mega Ohms)
1
0
③When holding board, do not hit/touch to Plastic part(s)
④After take defective board out from TV, put it into ESD bag.
Do not place on floor mat/carpet direct. And, always put it on
ESD cushion
SECTION 1
SAFETY NOTES
SAFETY NOTES SELF DIAGNOSTIC FUNCTION TROUBLESHOOTING SERVICE ADJUSTMENT DIAGRAMS PANEL HANDLING FACTORY DATA RESET
SYSSET
2020/12/1202:35:59(GMT+09:00)