Sony KDF-E42A10 - Specifications

Other Information
94
D:\WINNT\Profiles\noriko\Desktop\Troy EN2\2597544121\01US08OTH.fm
masterpage:3 columns Right
KDF-E42A10/KDF-E50A10
2-597-544-12(1)
Specifications
Projection System 3 LCD Panels, 1 lens projection system
LCD Panel 0.73 inch TFT LCD panel (1,280 × 720 pixels)
Projection Lens High Performance, large diameter hybrid lens F2.4
Antenna 75-ohm external terminal for VHF/UHF
Lamp 100W, XL-2400
Television System NTSC American TV Standard
ATSC (8VSB terrestrial) ATSC compliant 8VSB
QAM on cable ANSI/SCTE 07 2000
Visible Screen Size (Picture measured
diagonally)
KDF-E42A10: 42 inches
KDF-E50A10: 50 inches
Channel Coverage Terrestrial (analog) 2-69
Cable TV (analog) 1-125
Terrestrial (digital) 2-69
Cable TV (digital) 1-135
Number of Inputs/Outputs
HDMI IN Video 1080i, 720p, 480p, 480i
Audio Two channel linear PCM 32, 44.1 and 48 kHz,
16, 20 and 24 bit
Video (IN) 3 total (1 on side panel) 1 Vp-p, 75 ohms unbalanced, sync negative
S Video (IN) 1 Y: 1 Vp-p, 75 ohms unbalanced, sync
negative
C: 0.286 Vp-p (Burst signal), 75 ohms
Audio (IN) 5 total (1 on side panel) 500 mVrms (100% modulation)
Impedance: 47 kilohms
Component Video Input 2 (Y P
B/CB PR/CR) Y: 1 Vp-p, 75 ohms unbalanced, sync
negative
P
B/CB: 0.7 Vp-p, 75 ohms
P
R/CR: 0.7 Vp-p, 75 ohms
AUDIO (VAR/FIX) OUT 1 500 mVrms at the maximum volume setting
(Variable)
500 mVrms (Fixed)
Impedance (output): 2 kilohms
✍ AUDIO OUT jacks are operable only
when the TV’s Speaker is set to Off.
RF Inputs 2
PC Input 1
Digital Audio Optical Output
(PCM/Dolby Digital)
1 Optical Rectangular (1)
CableCARD Slot PCMCIA Type I/II
Speaker output 12 W + 12 W
Power requirement 120 V, 60 Hz
Power consumption In use: 210 W
In standby: Less than 17 W