Sony KDL-32EX721 - Page 46

KDL-32/40EX720,721,723,724(AEP/UK)
46
ADJUSTMENT
RESTORE WHITE BALANCE / GAMMA ADJ-DATA TO B BOARD
Note: Please apply after USB-DL when B board is replaced.
Change Data of “VPC” service mode.
a. Select “010 DATA_COPY” category by pressing “2 / 5” on remote.
b. Change data from “0” to “1” by pressing “1 / 4” on remote.
c. Wait until data is changed from 1 to 3.
d. When data is changed from 1 to 3, restoring process is finished.
e. In case data is changed from 1 to 2, keep default setting. (No more process is needed)
<End restore process>
VPC SERVICE
000 DATA_COPY
000 BU_TRANS 3
DATATRANSFERSUCCESS
<Restore process>
VPC SERVICE
000 DATA_COPY
000 BU_TRANS 1
DONOTPOWEROFF
DONOTTOUCHANYKEYNOW