40
GB
Sound
Problem Cause/Remedy
No sound, but good picture
• Press 2 +/– or % (Mute).
• Check that “Speaker” is set to “On” in the “Setup” menu (page 27).
Noisy sound
• See “Picture noise” causes/remedies on page 39.
Channels
Problem Cause/Remedy
The desired channel cannot be
selected
• Switch between digital and analog mode and select the desired digital/
analog channel.
Some channels are blank
• Scrambled/Subscription only channel. Subscribe to the Pay Per View
service.
• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
Digital channels are not
displayed
• Contact a local installer to find out if digital transmissions are provided in
your area.
• Upgrade to a higher gain antenna.
Some channels cannot be
selected
• Once you select a channel within your Favorite List of channels, pressing
PROG +/- will select only channels from your Favorite List. To select a
channel that has not been programmed as a Favorite List channel, use the
Program List feature or the number buttons.
General
Problem Cause/Remedy
The TV turns off automatically
(the TV enters standby mode)
• Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of
“On Timer” (page 26).
The TV turns on automatically
• Check if the “On Timer” is activated (page 27).
Some input sources cannot be
selected
• Select “Video Labels” in the “Setup” menu and cancel “Skip” of the input
source (page 26).
The remote does not function
• Check that the remote is set correctly for the equipment you are using.
• Replace the batteries.
The recorded images appear
enlarged when they are played
on a 4:3 screen size TV
• The images of digital broadcasting recorded on this TV appear enlarged
when they are played on a 4:3 screen size TV that cannot be adjusted to
other aspect modes.
Forgotten Parental Control
password
• Select “All Reset” in the “Setup” menu (page 28).
To Next Page
Loading...
