EasyManua.ls Logo

Sony KDL-46V2000 - Additional Information; Specifications

Sony KDL-46V2000
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
GB
Additional Information
Specifications
Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
KDL-46V2000: 46 inches
KDL-40V2000: 40 inches
KDL-32V2000: 32 inches
Display Resolution:
1,366 dots (horizontal) × 786 lines (vertical)
Power Consumption:
Indicated on the rear of the TV
Dimensions (w × h × d):
KDL-46V2000:
Approx. 1120 × 805 × 334 mm (with stand)
Approx. 1120 × 755 × 116 mm (without stand)
KDL-40V2000:
Approx. 988 × 716 × 334 mm (with stand)
Approx. 988 × 664 × 103 mm (without stand)
KDL-32V2000:
Approx. 792 × 593 × 219 mm (with stand)
Approx. 792 × 546 × 99 mm (without stand)
Weight:
KDL-46V2000:
Approx. 35 kg (with stand)
Approx. 29 kg (without stand)
KDL-40V2000:
Approx. 28 kg (with stand)
Approx. 22 kg (without stand)
KDL-32V2000:
Approx. 18 kg (with stand)
Approx. 16 kg (without stand)
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Analog: B/G, I, D/K, M
Digital: DVB-T
Color/Video System
Analog: PAL, PAL60, SECAM, NTSC4.43, NTSC 3.58
Digital: MP@HL and MP@ML
Antenna
75 ohm external terminals
Channel Coverage
Analog: B/G
VHF: E2 to E12 / UHF: E21 to E69 /
CATV: S01 to S03, S1 to S41
VHF: 0 to 12, 5A, 9A / UHF: 28 to 69 /
CATV: S01 to S03, S1 to S44 (Australia only)
VHF: 1 to 11 / UHF: 21 to 69 /
CATV: S01 to S03, S1 to S41(New Zealand only)
I
UHF: B21 to B69 / CATV: S01 to S03, S1 to S41
D/K
VHF: C1 to C12, R1 to R12 /
UHF: C13 to C57, R21 to R60 /
CATV: S01 to S03, S1 to S41, Z1 to Z39
M
VHF: A2 to A13 / UHF: A14 to A79 /
CATV: A-8 to A-2, A to W+4, W+6 to W+84
Digital: VHF/UHF
Terminals
S VIDEO 1/2:
S VIDEO (4-pin mini DIN):
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75ohms
VIDEO IN 1/2/3:
VIDEO:
1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO:
500 mVrms
Impedance: 47 kilohms
HD/DVD IN:
Y, P
B/CB, PR/CR (Component Video):
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
P
B/CB: 0.7 Vp-p, 75 ohms
P
R/CR: 0.7 Vp-p, 75 ohms
Signal format: 480i, 576i, 480p, 576p, 720p, 1080i
AUDIO:
500 mVrms
Impedance: 47 kilohms
VIDEO OUT:
VIDEO:
1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO:
More than 1 Vrms at the maximum volume setting
(Variable)
More than 500 mVrms (Fixed)
DIGITAL OUT (OPTICAL) (DIGITAL OUT (OPTICAL) jack)
HDMI IN
Video: 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
33, 44.1 and 48 kHz, 16, 20 and 24 bits
PC:
D-sub 15-pin, analog RGB, 0.7 Vp-p,
75 ohms, positive
See the PC Input Signal Reference Chart on page 38.
AUDIO:
Stereo minijack, 0.5 Vrms, 1 kilohm
Headphones i
Stereo minijack
Sound Output
10 W + 10 W
Supplied Accessories
Refer to “1: Checking the accessories” on page 4.
Additional Information
Continued