Sony MHC-550 - Playing Tracks Repeatedly (Repeat Play)

5 Repeat steps 3 and 4 to program the
remaining tracks you want to be played
in the order you want them to play.
6 Press Pu.
All the tracks play in the order you
chose.
To Press
Check the program CHECK repeatedly’.
Program a pause Lh
Stop play a
Cancel the program CONTINUE.***
BB at
Erase a track from CLEAR in stop mode.
the end
Erase a specific CHECK repeatedly
track so the number of the
track lights up, and
press CLEAR.
Erase the entire @ once in stop mode,
program twice during play.
* After the last track appears, “END” will
appear in the display.
™ Use the buttons on the remote
commander to do this operation.
“P’and “B” appear in the display and
the total playing time is reset to 0.00.
Do not program a pause when you
want to use the CD SYNCHRO button
for recording.
“* The program has been erased and the
play continues in normal play mode.
To change the order of programmed
tracks
To change the order, erase the entire
program and create a new one.
To check the total remaining time of
ie programmed tracks
Press TIME once to see the remaining
time of the track being played.
2 Press TIME again to see the remaining
play time of the whole program.
3 Press TIME once more to return to the
initial display.
ee Se ae oe ees
Playing Tracks
Repeatedly (repeat
play)
You can choose between two different
repeat play modes. One repeats all the
tracks in the current play mode; the other
repeats a single track.
Use the buttons on the unit to do this
operation.
POWER—ON
REPEAT
Repeating all the tracks (in any play
mode)
1 Press REPEAT once so that “REPEAT”
lights up in the display.
2 Press Pt.
Repeating a single track (in normal
play mode only)
Press REPEAT twice while playing the
desired track so that “REPEAT 1” lights up
in the display.
To cancel repeat play
Press REPEAT several times so that
“REPEAT” or “REPEAT 1” disappears from
the display.