Basic Operations
23
Recording from a
tape
— High-speed Dubbing
3 Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
4 Press P PAUSE.
Dubbing starts.
To stop dubbing
Press p.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to ß when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
You can use TYPE I (normal) or TYPE II
(CrO2) tapes. The recording level is
automatically adjusted.
1 Press § and insert a recorded tape
in deck A and a blank tape in deck
B.
2 Press HI-DUB.
Deck B stands by for recording.
With the side
you want to
play/record
facing forward
1
4
1
3
(Power)
2
DOLBY NRp
To Next Page
Loading...
Need help?
General
