DVD/VIDEO CD/CD/MP3/JPEG – Play
19
GB
x When playing a VIDEO CD/CD/MP3
when Program Play is set to OFF
•OFF: does not play repeatedly.
• ALL: repeats all the tracks on a disc, or
all the tracks in the current album*.
• TRACK: repeats the current track.
x When playing a JPEG
•OFF: does not play repeatedly.
• ALL: repeats all the files on the disc, or
repeats the current album*.
x When Program Play is set to ON
•OFF: does not play repeatedly.
• ALL: repeats Program Play.
4 Press ENTER.
Repeat Play starts.
* When “ALBM” is selected for MP3 or JPEG.
To cancel Repeat Play
Select “OFF” in step 3, or press CLEAR.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu disappears.
Notes
• Depending on the DVD, you cannot perform Repeat
Play.
• You cannot perform Repeat Play during PBC
playback of VIDEO CDs (page 16).
• If you select “ALL”, the program repeats up to five
times.
Tips
• You can set Repeat Play when the playback is
stopped. Press REPEAT repeatedly to select the
setting, then press nN to start Repeat Play.
• You can quickly display the “REPEAT” status. Press
REPEAT.
You can make a program of up to 25 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 41).
Using the front panel display
1 Press FUNCTION repeatedly (or DVD
on the CD/DVD player) to switch the
function to DVD.
2 Press PLAY MODE in stop mode
repeatedly until “PGM” appears.
3 Press . or > repeatedly until the
desired title or track number appears.
When programming an MP3, press
ALBUM – or + to select album, then press
. or > repeatedly until the desired
track number appears.
4 Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
5 To program additional tracks, repeat
steps 3 and 4.
6 Press nN.
Program Play starts.
Creating your own
program
—Program Play
Selected track number
continued
To Next Page
Loading...
Need help?
General
