Tape – Play
39
GB
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the display.
To check the RDS information
Each time you press DISPLAY, the display
changes cyclically as follows:
Station name* t Frequency t Program type*
t Clock display t Effect status
* If the RDS broadcast is not properly received, the
station name or the program type may not appear in
the display.
1 Press A Z or Z B on the tape deck.
2 Load a recorded/recordable tape into
the cassette holder.
Tape – Play
Loading a tape
With the side you want
to play/record facing
forward.
To Next Page
Loading...
Need help?
General
