22
GB
3 Press ENTER.
“** (**)” changes to “– – (**).”
4 Press M or m repeatedly, or press the
number buttons to select the chapter
or index number you want to search.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
5 Press ENTER.
The playback starts from the selected
number.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu disappears.
To cancel searching
Press O RETURN.
To search for a particular point
using the time code
— Time Search
1 In step 2, select “TIME”.
“T **:**:**” (playing time of the current title
or track) is selected.
2 Press ENTER.
“T – –:– –:– –” appears above “T **:**:**”.
3 Input the time code using the number
buttons, then press ENTER.
For example, to find the scene at 2 hours,
10 minutes, and 20 seconds after the
beginning, enter “2:10:20”.
Notes
• The title, chapter or track number displayed on the
TV screen is the recorded data on the disc.
• You cannot search a scene of a VIDEO CD.
• If you play a DVD, input the playing time of the
current title using the time code. If you play a CD,
VIDEO CD or MP3, input the playing time of the
current track using the time code.
Tip
You can change the display to show playing time or
remaining time. For details, see “Viewing information
about the disc in the on-screen display” on page 52.
DVD
DVD
1 2
(
2 7
)
MAKING SCENE
T
1 : 3 2 : 5 5
– –
(
3 4
)
To Next Page
Loading...
Need help?
General
