Sony MP-CL1 - Picture Quality Troubleshooting; USB OUT Jack Charging Indicator; Flickering or Blurred Image Fixes; Trapezoidal Image Correction

MP-CL1 3-MP0-107-01
The lamp blinks in red while charging another device via the USB OUT
jack.
• The battery of this product is almost depleted.
• The USB cable (supplied) may not be connected correctly. Disconnect it and
reconnect.
• The specifications of the connected device may not meet the requirements.
Check the charging specifications of the device.
Picture
The image is flickering or blurred.
• The synchronization timing of the input signals may need to be adjusted. Select
[ Setup] - [ Biphase alignment] in the menu and adjust the timing.
The image is a trapezoidal shape.
• Move this product to adjust the projection angle.
• Correct the distortion electronically in the [ Keystone] menu.
The image is reversed.
• Select [ Flip (left-right)] in the menu to flip back the image.