Sony MPK-DVF7 - Prepare Marine Pack: Install Battery; Remove Marine Pack Grip; Insert CR2 Lithium Battery; Open Marine Pack Latches

9-GB
GB
1 Remove the grip.
Undo the screw on the bottom side of
the marine pack.
2 Insert the Sony CR2 lithium battery into the grip.
WARNING
Battery may explode if mistreate.
Do not recharge, disassemble or
dispose of in fire.
1 Remove the screw with the supplied
screw driver.
2 Insert the supplied lithium battery
(CR2, × 1) with the polarity
positioned correctly as indicated on
the battery case.
3 Fasten the screw tightly.
3 Unfasten the 3 latches and open the
marine pack.
If you lift the metal part in the direction
of the finder when the latches are open,
the latches will stop.
Preparing the marine pack (installing the battery)
continued