Sony MSW-M2100 - 3-2 Connecting a Reference Video Signal

Chapter 3 Preparations
Chapter 3 Preparations 3-5
• SDI OUTPUT
• COMPOSITE
• COMPONENT
REF. VIDEO
INPUT
Video monitor
MSW-M2100/M2100P/M2100E/M2100EP
a)
75 Ω termination switch: ON
Reference video signal
3-2 Connecting a Reference Video Signal
Connect a reference video signal as shown below.
Reference signal for video output and
servo system
The output from the internal reference video signal
generator is supplied to the output video signal and
servo circuits as a reference signal.
External sync signal for the internal
reference video signal generator
The internal reference video signal generator is
synchronized to an input reference video signal.
a) The figure shows the MSW-M2100/M2100P.