Chapter 4 Playback and File Transfer
Chapter 4 Playback and File Transfer 4-1
4-1 Preparations for Playback
This section describes preparations for video and audio
playback.
4-1-1 Switch and Menu Settings
Before beginning playback, make necessary switch
and menu settings.
For details on each setting, see the pages indicated in
parenthesis.
Z
CTL/TC
TC
MENU
Audio signal selection buttons
(see page 2-6)
:
Select the audio channel(s) to be monitored.
POWER switch: ‘ & ’ side (ON)
TCR setting
(see page 10-3)
: Select the time code to be displayed.
REMOTE buttons
(see page 2-2)
: off
PB controls
(see page 2-6)
:
Adjust the audio playback levels.
CTL/TC setting
(see page 10-3)
: Select the time data to be
displayed.
Chapter 4 Playback and File Transfer
a) The figure shows the MSW-M2100/M2100P.
To Next Page
Loading...
