Sony MZ-N10 Notes: installing & operating OpenMG - DC Motor SSM21 A (Sled) (M602), DC Motor SSM18 D (Spindle) (M601), DC Motor Unit (over Write Head Up;Down) (M603); Holder Assy

10
MZ-N10
3-7. DC Motor SSM21A (Sled) (M602), DC Motor SSM18D (Spindle) (M601),
DC Motor Unit (Over Write Head Up/Down) (M603)
3 two screws
(M1.4)
8 screw
6 three screws
5 motor base assy
9 DC motor unit (over write head up/down)
(M603)
7 DC motor SSM18D (spindle) (M601)
4 DC motor SSM21A (sled) (M602)
2 Remove two solders of the
flexible board.
1 Remove four solders of the
flexible board.
A
2 bos
s
1 boss
3 Open the holder assy.
4 Remove the holder assy in the direction of the arrow A .
3-8. Holder Assy