Sony MZ-N10 Notes: installing & operating OpenMG - Panel and Board Disassembly

7
MZ-N10
3-1. Bottom Panel Section, Jog Dial Section
S802
S951
5
4
3 two screws
(M1.4)
1 screw (M1.4)
2 screw (M1.4)
knob (HOLD)
knob (OPEN)
knob (BATT)
6 bottom panel assy
Notes: On installation, adjust the position of both switch (S802) and knob (hold).
@@@ Adjust the position of both switch (S951) and knob (batt).
@@@ Adjust the position of both the convex part of an open lever and knob (open).
The convex part of an open lever
7 flexible board (CN891
)
8 jog dial assy
3-2. Upper Panel Section
2 Slide the open lever in the direction of the arrow,
and open the upper panel section.
3 two screws
(M1.4)
4 two screws
(M1.4)
5 upper panel assy
1 flexible board (CN871
)