16
MZ-N10
Example2: When the keys on the remote commander are con-
sidered as OK:
5. When all keys were checked or if the upper panel is opened,
the key check mode quits and the test mode (display check
mode) comes back.
• Jog check mode
Jog check mode is available during the key check mode.
1. Turn the jog dial downwards one click.
2. Turn the jog dial downwards three more clicks.
3. Turn the jog dial upwards one click.
4. Turn the jog dial upwards three more clicks.
Remote commander LCD display
Set LCD display
**
: AD value of the remote commander key
(hexadecimal 00 to FF)
RMC OK **
888
RMC OK **
888
Remote commander LCD display
JOG+ 1 **
000
Remote commander LCD display
JOG+OK **
000
Remote commander LCD display
JOG- 1 **
000
Remote commander LCD display
JOG-OK **
000
To Next Page
Loading...
