Sony MZ-NH600 - Moving a Track in a Disc with Group Setting

46
You can move a track from one group out
of the group or to another group. You can
also move a track that does not belong to a
group to an existing group.
1 Do step 1 of “Changing the order of a
track on a disc” (page 45).
2 When moving a track out of a group,
skip this step.
When moving a track to a different
group, turn the jog dial until the
destination group appears in the
display, and then press NENT.
3 Turn the jog dial until the destination
track number appears in the display,
and then press NENT to enter the
selection.
1 While playing a track within a group
whose order you want to change,
enter the menu and select “Edit” -
“Move” - “ : Move”.
The group number to which the
currently playing track belongs
appears in the middle row of the
display.
2 Turn the jog dial to select the
destination point on the disc, and then
press NENT to enter the selection.
z
If the track or group has been labeled, press the
5-way control key towards > to make the
track or group name appear in the display
during operation. Press the control key towards
. to return to the track or group number
display.
If all tracks are moved out of the group, the
group automatically disappears from the disc.
Moving a track in a disc with
group setting
1
4123
3
1
24
35 62
1
4123
3
2
545 123
Group 1
Group 2
Group 2
Group 1
Moving track number 2 in group
1 to track number 3 in group 2
Group 3
Group 3
Disc
Disc
Changing the order of a
group on a disc
Note
Example: When moving the track to the track
number “03” in the second group (GP02).
Example: Moving the first group in the disc
(Group01) to the position between the
second (Group02) and the third (Group03)
group.