18-EN
Checking the remaining
time or the playing
position
1 Press DISPLAY while playing.
Each time you press DISPLAY, the
display changes as follows.
Locking the controls
To prevent the buttons from being
accidentally operated when you carry the
recorder, use this function.
1 Slide HOLD in the direction of the
c .
On the recorder, slide HOLD to lock
the controls of the recorder. On the
remote controller, slide HOLD to lock
the controls of the remote controller.
Slide HOLD in the opposite direction
of the arrow to unlock the controls.
HOLD
HOLD
DISPLAY
Position pointer (shows the
current location on the MD)
A
B
1)
Track number appears when the MD has
no track name.
2)
Remaining number of the disc appears
when the disc has no name.
3)
If you record without setting the clock or
play an MD that has no recorded date,
“--y--m--d” and “--:--” appear.
A
Elapsed time
Remaining time of
the current track
Remaining time
after the current
location
Recorded time
3)
B
Track number
Track name
1)
Disc name
2)
Recorded date
3)
z
If you want to check the remaining time or
the recording position while recording or in
stop mode, see page 14.
To Next Page
Loading...
Need help?
General
