Sony MZ-R500PC - Page 26

26
MZ-R500/R500PC
11. Adjust with the [VOL+] key (adjusted value up) or [VOL--]
key (adjusted value down) so that the adjusted value becomes
AA.
12. Press the X key.
(0D5D is blinking)
13. Press the [VOL+] key once to change the blinking portion to
0D5E.
14. Press the x key.
(00 is blinking)
15. Adjust with the [VOL+] key (adjusted value up) or [VOL--]
key (adjusted value down) so that the adjusted value becomes
04.
16. Press the X key.
(0D5E is blinking)
17. Press the
[VOL+] key to change the blinking portion to 0D61.
18. Press the x key.
(00 is blinking)
19. Adjust with the [VOL+] key (adjusted value up) or [VOL--]
key (adjusted value down) so that the adjusted value becomes
20.
20. Press the X key.
(0D61 is blinking)
21. Press the [VOL+] key to change the blinking portion to 0D64.
22. Press the x key.
(00 is blinking)
• Modified Data Writing Method (version 1.100)
1. Select the manual mode of the test mode, and set item number
022 (see page 13).
2. Press the
[ENTER] key and set the address & adjusted value
display (see page 14).
3. Press the X key to initialize the patch data.
4. Select the manual mode of the test mode, and set item number
023 (see page 13).
5. Press the
[ENTER] key and set the address & adjusted value
display (see page 14).
6. Press the [VOL+] key once to change the adjusted value to 01.
7. Press the [T.MARK] + [PAUSE] keys to activate the patch
data write mode.
(The following display will appear where 00 is blinking)
8. Press the X key.
(0D5C is blinking)
9. Press the [VOL+] key once to change the blinking portion to
0D5D.
10. Press the x key.
(00 is blinking)
This set LCD display
0 2 2 PatClr
This set LCD display
0 2 2
CC: Adjusted value
SCC
This set LCD display
0 2 2
DD: Adjusted value
SDD
This set LCD display
0 2 3 Patch
This set LCD display
0 2 3 ###S00
###: Address
00: Adjusted value
This set LCD display
0 2 3 0D5C00
00: Adjusted value
This set LCD display
0 2 3 0D5D00
00: Adjusted value
This set LCD display
0 2 3 0D5DAA
AA: Adjusted value
This set LCD display
0 2 3 0D5E00
00: Adjusted value
This set LCD display
0 2 3 0D5E04
04: Adjusted value
This set LCD display
0 2 3 0D6100
00: Adjusted value
This set LCD display
0 2 3 0D6120
20: Adjusted value
This set LCD display
0 2 3 0D6400
00: Adjusted value