Why does the playback sound skip on my Sony CD Player?
If the playback sound skips on your Sony CD Player, it could be due to the recorder being placed on an unstable surface that receives continuous vibration. Try placing it on a stable surface.
What to do if there is no sound through headphones on Sony MZ-R90 CD Player?
If you're not getting any sound through your headphones on your Sony CD Player, here are a few things to check: * Make sure the headphone plug is securely connected to the remote control and that the remote control is firmly connected to the i/LINE OUT. * The volume might be too low. Adjust it by pressing the VOL +/– buttons. * The AVLS (Automatic Volume Limiter System) might be enabled. Try setting AVLS to “AVLS OFF”.
Why does the clock lose time on my Sony MZ-R90?
If the clock on your Sony CD Player loses time, the display flashes, or the recording date isn't stamped on the disc, it could be due to a weak built-in battery. Connect the AC power adapter to DC IN 3V on the recorder and the wall outlet to charge the built-in battery. After charging, set the clock again. Also, make sure the clock is set.
How to fix rechargeable battery not charging on Sony MZ-R90?
If the rechargeable battery in your Sony CD Player isn't charging, ensure that the battery is inserted correctly and the AC power adapter is properly connected.
Why can't CD text information be recorded on my Sony MZ-R90 CD Player?
If your Sony CD Player isn't recording CD text information, it could be due to several reasons: * The cable connecting the devices might not be an optical cable. Use an optical cable. * The connected portable CD player may not support CD-TEXT. Connect a portable CD player that supports CD-TEXT. * The inserted CD might not support CD-TEXT. Use a CD that supports CD-TEXT.
What to do if my Sony MZ-R90 has a lot of static?
If the sound from your Sony CD Player has a lot of static, it might be due to strong magnetism from a nearby television or similar device interfering with its operation. Try moving the recorder away from the source of the strong magnetism.
Why is MD not playing from the first track on my Sony CD Player?
If your Sony CD Player isn't playing an MD from the first track, it might be because the disc playing stopped before it reached the last track. Flip the jog lever or open and close the lid to go back to the beginning of the disc, and restart playing after checking the track number in the display.
How to find track marks on Sony CD Player?
If you cannot find the track marks on your Sony CD Player, make sure to press X before flipping the jog lever or pressing . or >.
General| Sampling Frequency | 44.1kHz |
|---|---|
| Digital Input | Optical |
| Type | MiniDisc Recorder/Player |
| Formats | MiniDisc |
| Recording Format | ATRAC |
| Recording Modes | SP |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 90 dB |
| Power Source | AA battery (optional) |
| Headphone Output | 3.5mm stereo mini jack |
| Microphone Input | 3.5mm stereo mini jack |
| Line Input | 3.5mm stereo mini jack |
| Recording Time | Up to 80 minutes (SP mode) |
Safety precautions regarding electrical hazards, fire risks, moisture exposure, and laser radiation.
Details features like synchro-recording, digital REC level control, and shock-resistant memory.
Steps for inserting the MD and initiating the recording process.
Steps to enable, prepare, and start recording in sync with a source player.
Required equipment and cables for copying CD text information.
Step-by-step instructions to copy track and disc names from CDs using the Joint Text function.
Important considerations regarding CD-TEXT compatibility, cable usage, and playback interruptions.
How to lock and unlock the recorder and remote controls to prevent accidental operation.
Detailed steps and warnings for erasing a single track from an MD.
Instructions and precautions for erasing all data on an MD disc.
Steps to erase track marks and combine adjacent tracks, including associated data removal.
Detailed steps for initial charging of the NH-14WM battery, including notes and warnings.
Safety warnings related to power jacks, adapters, and unplugging.
Guidelines on heat build-up, installation environment, and headphone usage.
Proper handling, storage, and cleaning instructions for MD cartridges and the recorder.
Explanation of Serial Copy Management System restrictions on digital copying.
Comprehensive troubleshooting steps for common operational problems.
Solutions for the lid not opening and issues related to power interruptions during operation.
Solutions for no sound, playback starting issues, skipping, and static.
Resolving issues with track marks, battery charging, clock, CD text, and audio controls.
Reasons for the "TR FULL" message, relating to track count and fragmentation.
Explains the meaning and remedies for various error messages displayed by the recorder.
Explains the meaning and remedies for additional operational error messages.
Explains the meaning and remedies for EMPTY and BANK FULL error messages.
Details on audio system, laser properties, recording/playback times, and error correction.
Specifications for inputs, outputs, power sources, and dimensions.
Explanation of how MiniDisc technology works, differentiating between premastered and recordable discs.
Identifies and lists the function and page references for each button and jack on the recorder.
Explains the meaning and function of each indicator and display element on the recorder.
Identifies the parts of the remote control and explains their functions.
To Next Page
