Why does the playback sound skip on my Sony CD Player?
If the playback sound skips on your Sony CD Player, it could be due to the recorder being placed on an unstable surface that receives continuous vibration. Try placing it on a stable surface.
What to do if there is no sound through headphones on Sony MZ-R90 CD Player?
If you're not getting any sound through your headphones on your Sony CD Player, here are a few things to check: * Make sure the headphone plug is securely connected to the remote control and that the remote control is firmly connected to the i/LINE OUT. * The volume might be too low. Adjust it by pressing the VOL +/– buttons. * The AVLS (Automatic Volume Limiter System) might be enabled. Try setting AVLS to “AVLS OFF”.
Why does the clock lose time on my Sony MZ-R90?
If the clock on your Sony CD Player loses time, the display flashes, or the recording date isn't stamped on the disc, it could be due to a weak built-in battery. Connect the AC power adapter to DC IN 3V on the recorder and the wall outlet to charge the built-in battery. After charging, set the clock again. Also, make sure the clock is set.
How to fix rechargeable battery not charging on Sony MZ-R90?
If the rechargeable battery in your Sony CD Player isn't charging, ensure that the battery is inserted correctly and the AC power adapter is properly connected.
Why can't CD text information be recorded on my Sony MZ-R90 CD Player?
If your Sony CD Player isn't recording CD text information, it could be due to several reasons: * The cable connecting the devices might not be an optical cable. Use an optical cable. * The connected portable CD player may not support CD-TEXT. Connect a portable CD player that supports CD-TEXT. * The inserted CD might not support CD-TEXT. Use a CD that supports CD-TEXT.
What to do if my Sony MZ-R90 has a lot of static?
If the sound from your Sony CD Player has a lot of static, it might be due to strong magnetism from a nearby television or similar device interfering with its operation. Try moving the recorder away from the source of the strong magnetism.
Why is MD not playing from the first track on my Sony CD Player?
If your Sony CD Player isn't playing an MD from the first track, it might be because the disc playing stopped before it reached the last track. Flip the jog lever or open and close the lid to go back to the beginning of the disc, and restart playing after checking the track number in the display.
How to find track marks on Sony CD Player?
If you cannot find the track marks on your Sony CD Player, make sure to press X before flipping the jog lever or pressing . or >.
General| Sampling Frequency | 44.1kHz |
|---|---|
| Digital Input | Optical |
| Type | MiniDisc Recorder/Player |
| Formats | MiniDisc |
| Recording Format | ATRAC |
| Recording Modes | SP |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 90 dB |
| Power Source | AA battery (optional) |
| Headphone Output | 3.5mm stereo mini jack |
| Microphone Input | 3.5mm stereo mini jack |
| Line Input | 3.5mm stereo mini jack |
| Recording Time | Up to 80 minutes (SP mode) |
To Next Page
