Sony PRS-350 - Case Lower; Battery Assy (Bat1)

PRS-350
4
2-3. CASE LOWER
2-4. BATTERY ASSY (BAT1)
Note: Exchange it for an absolutely new part when you remove the BATTERY ASSY (BAT1) built into this set.
2 screw
(M1.4)
4 seven claws
5 case lower
3
1 two step screw
s
(panel)
– Rear side view –
2 Turn over the sheet (BATT).
4 Pull this part of sheet (BATT) and lift the battery assy.
5 battery assy (BAT1)
3 battery connector
1 sheet (cable)
sheet (BATT)
battery wire
MAIN board
:LUHSURFHVVLQJ
–5HDUVLGHYLHZ–