Sony PS-X7 - HARDWARE NOMENCLATURE

PS-X6/X7
HARDWARE NOMENCLATURE
Screw: —P3x 10 --4 e
Reference tse
L: Length in mm } iif H il Designation Description Remarks
ees Diameter in mm ho bu SELF-TAPPING SCREWS
i ay
Type of head sade Or self-tapping screw ex: TA,P3x 10
Indicated slotted-head only. pan-head self-tapping binding-head self-
Unless otherwise indicated, it means screw tapping (TA, B) screw for
cross-recessed head {Phillips type). replacement
pan-head self-tapping binding-head self
er screw with washer face tapping (TA, B) screw and
Nut, Washer, Retaining ring: flat washer for replacement
N3 pan-head thread-rolling binding-head (B) screw and
Diswietaiat Gagblé sciew or shale screw with washer face flat washer for replacement
Reference designation SET SCREWS
set screw
hexagon-socket set screw : SC 2.6 x 4, hexagon
socket
Reference
Designation
Description Remarks
|
SCREWS
pan-head screw binding-head (B) screw for
replacement
NUT
WASHERS
flat washer
pan-head. screw with binding-head (B) screw and
washer face flat washer for replacement
Pan-head screw with binding-head (B) screw and
spring washer spring washer for replace-
ment
spring washer
internal-tooth tock > LW, internal
washer
external-tooth lock : LW3, external
washer
RETAINING RINGS
retaining ring
pan-head screw with binding-head (B) screw and
spring and flat washers spring and flat washers for
replacement
round-head screw binding-head (B) screw for
replacement
RK oval-countersunk-head
binding-head screw
truss-head screw binding-head (B) screw for
replacement
grip-type retaining ring
flat-fillister-head screw
fillister-head screw
braizer-head screw
Sony Corporation
© 1977 77106104-1
9-958-419-01 mee
Printed by: Schaltungsdienst Lange, Berlin (Germany)