Need help?Do you have a question about the Sony RM-IP10 and is the answer not in the manual?
General| Interface | - |
|---|---|
| Input type | Press buttons |
| Product color | Gray |
| Brand compatibility | Sony |
| Compatible products | BRC-H900, BRC-Z330, BRC-Z700 |
| Remote control proper use | Digital camera |
| Built-in display | No |
| Maximum range | - m |
| Ethernet LAN | Yes |
| Harmonized System (HS) code | 85299097 |
Weight and Dimensions| Weight | - g |
|---|
Information on operating and storing the unit to prevent damage from environmental factors.
Details the capabilities of the IP remote controller, including camera operation and connection types.
Identifies and explains the purpose of physical controls and connectors on the RM-IP10 unit.
Guides on connecting cameras via IP, RS-232C, and RS-422 interfaces, and other devices.
Step-by-step instructions for powering on the RM-IP10 unit and connected cameras.
Explains how to save camera positions and settings using the preset feature.
Details how to adjust the panning/tilting speed for preset camera movements.
Covers functions like setting a limit on maximum panning/tilting speed.
Instructions to reset the RM-IP10 unit to its original factory default settings.
Provides solutions for common operational problems and symptoms.
Lists technical details, input/output connectors, and power requirements of the unit.
Provides physical measurements of the RM-IP10 unit from different views.
Details the pin configurations for VISCA RS-232C, RS-422, and TALLY/CONTACT connectors.
Instructions on how to prepare and use the VISCA RS-422 connector plug.
Details input/output connections and signal waveforms for the TALLY/CONTACT connector.
Outlines the software license conditions for component uIP support.
To Next Page
