Still image mode switching: Sets the shooting still image mode.
Still image shooting interval: Sets the still image shooting interval for high speed
continuous shooting and motion shot LE shooting.
Self-timer: Sets the self-timer.
Interval photo recording settings
The items listed below can be set in the interval photo recording mode.
SteadyShot: Activates the camera-shake reduction when shooting.
Field angle setting: Sets the field angle setting of the camera.
Flip: Records the image upside down.
Scene: Sets an image quality suitable for scenes.
White balance: Adjusts the white balance according to your preference.
AE shift: Adjusts the exposure according to your preference.
Interval photo recording: Sets the time lapse setting for interval photo recording mode.
Loop recording settings
The items listed below can be set in the loop recording mode.
Image quality setting: Sets the image resolution and frame rate for shooting movies.
Movie format: Selects the movie format.
SteadyShot: Activates the camera-shake reduction when shooting.
Flip: Records the image upside down.
Scene: Sets an image quality suitable for scenes.
White balance: Adjusts the white balance according to your preference.
AE shift: Adjusts the exposure according to your preference.
Color mode: Sets the image color tone.
Audio recording setting: Selects the sound recording setting.
Wind noise reduction: Sets to cut low-range wind noise according to the noise level when
recording using the built-in microphone.
Loop recording interval: Sets the loop recording interval time.
The setting items of connecting devices
*2
Connecting devices settings
You can set the following items.
Time code/User bit
*4
: Selects the time code/user bit function setting.
IR-remote control: Sets the infrared remote control RMT-845 (sold separately).
Switching NTSC/PAL: Selects a setting, depending on the TV system of the country or
region where you use this camera.
Auto power off: Sets the power of the camera to turn off automatically.
Beep: Sets the beep to ON/OFF.
Format
*3
: Deletes all images in the memory card and restores the memory card to its
initial state.
Version (camera): Displays the software version of the camera.
The setting items of this unit
Remote control settings
You can set the following items.
To Next Page
Loading...
