When this unit is not connected to the camera via Wi-Fi, the camera settings cannot be changed.
[37] How to use Changing the Settings Connecting devices settings
Beep
You can set the audible notification for camera operation.
1. Press the MENU button.
The list of setting items is displayed.
2. Press the UP button or DOWN button to select (Connecting devices settings) -
(Beep) and press the REC/ENTER button.
3. Press the UP button or DOWN button to select the following setting, then press the REC/ENTER
button.
: All operation sounds are enabled.
: All operation sounds are disabled.
: Operation sounds are emitted for the following operations only.
Power turned on
Recording started
Recording stopped
Shutter pressed
A disabled operation was selected or an error occurred
Wi-Fi connection confirmation beep
Note
When this unit is not connected to the camera via Wi-Fi, the camera settings cannot be changed.
[38] How to use Changing the Settings Connecting devices settings
Format
You can delete all movies and still images in the media and restore it to its initial state.
1. Press the MENU button.
The list of setting items is displayed.
2. Press the UP button or DOWN button to select (Connecting devices settings) -
(Format) and press the REC/ENTER button.
To Next Page
Loading...
