Sony RMT-V503C User Manual

AEP Model
SLV-D920 B/D920 E/D920 N/D925 E/
D930 D/D960P B/D960P E
UK Model
SLV-D930 GI
Russian Model
SLV-D920 R
SERVICE MANUAL
DVD PLAYER/
VIDEO CASSETTE RECORDER
SPECIFICATIONS
RMT-V503C/V503D
TS-10 MECHANISM
Refer to the SERVICE MANUAL of VHS MECHANI-
CAL ADJUSTMENT MANUAL VII for MECHANICAL
ADJUSTMENTS. (9-921-790-11)
PA L
System
Laser
Semiconductor laser
Signal format system
PAL/(NTSC)
SLV-D920 B/D960P B:
SECAM
SLV-D920 B/D920 N/D920 R/D960P B:
MESECAM
Channel coverage
SLV-D920 B/D920 E/D925 E/D930 D/D960P B/
D960P E:
PAL (B/G):
VHF E2 to E12
VHF Italian channel A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
SLV-D930 GI:
PAL (I):
VHF IA to IJ, SA10 to SA13
UHF B21 to B69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
SLV-D920 B/D960P B:
SECAM (L):
VHF F2 to F10
UHF F21 to F69
CATV B to Q
HYPER S21 to S41
SLV-D920 N/D920 R:
PAL (B/G, D/K):
VHF E2 to E12, R1–R12
UHF E21 to E69, R21–R69
CATV S01 to S05, S1 to S41
RF output signal
SLV-D920 E/D920 N/D920 R/D930 D/D930 GI/
D960P E:
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL 23.39 mm/s
(recording/playback)
NTSC 33.35 mm/s
(playback only)
SLV-D920 B/D960P B:
SECAM 23.39 mm/s
(recording/playback)
MESECAM 23.39 mm/s
(playback only)
SLV-D920 N/D920 R:
MESECAM 23.39 mm/s
(recording/playback)
— Continued on next page —
SLV-D920 B/D920 E/D920 N/D920 R/D925 E/
D930 D/D930 GI/D960P B/D960P E
RMT-V503D
SLV-D960P E

Sony RMT-V503C Specifications

General

Brand	Sony
Model	RMT-V503C
Category	DVD Player
Language	English

Summary

SPECIFICATIONS

System

Details of system configurations, including laser and signal format.

RF output signal

Specifies the RF output signal channels for different models.

Aerial out

Describes the aerial connection type.

Tape speed

Lists the tape speeds for PAL and NTSC playback.

3. Block Diagram

5-1 S.M.P.S.

5-2 Power Drive

5-7 Input-Output (2 Scart Jack)

5-9 I/O (RCA)

6. ALIGNMENT AND ADJUSTMENTS

6-1 VCR ADJUSTMENT

Procedures for adjusting VCR tracking, head switching, and NVRAM options.

6-2 VCR MECHANICAL ADJUSTMENT

Procedures for mechanical adjustments of the VCR tape transport system.