17
US
Specifications
General
Power requirements
120 V AC, 60 Hz
Power consumption
90 W
1.8 W (standby mode)
Operating temperature
5˚C to 35˚C (41˚F to 95˚F)
Operating humidity
5 % to 90 %
Supplied accessories
See page 4.
Design and specifications are subject to change without
notice.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 3 ohm loads, both channels
driven, from 120 – 10,000 Hz; rated 25
watts per channel minimum RMS
power, with no more than 10 % total
harmonic distortion from 250
milliwatts to rated output.
SA-WPSD5 (subwoofer)
Max. output
Subwoofer: 80 W (4 ohms)
Front: 40 W + 40 W (6 ohms)
Center*: 40 W
Rear*: 40 W + 40 W
* Depending on the sound field settings and the source, there may be
no sound output.
Speaker system Bass reflex
Speaker unit 200 mm (7
7
/8 inches) dia. cone type
Rated impedance
4 ohms
Dimensions (approx.)
300 × 300 × 300 mm
(11
7
/8 × 11
7
/8 × 11
7
/8 inches) (w/h/d,
not including the projecting parts)
Mass (approx.) 9.7 kg (21 lb 6 oz )
SS-SPSD5 (satellite speakers)
Speaker system Bass reflex
Speaker unit 77 mm (3
1
/8 inches ) dia. cone type
Rated impedance
6 ohms
Dimensions (approx.)
110 × 115 × 110 mm
(4
3
/8 × 4
5
/8 × 4
3
/8 inches) (w/h/d)
Mass (approx.) 780 g (1 lb 12 oz)
To Next Page
Loading...
