1/10-11_SAW10.11EN 3-810-424-12(1)
11
EN
Additional Information
Specifications
For the U.S.A. model
Audio power specifications
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, from 20 – 20,000 Hz; rated 23 watts
per channel minimum RMS power, with no more than
0.8 % total harmonic distortion from 250 milliwatts to
rated output.
System
Type Active Super Woofer (magnetically shielded
design)
Speaker unit Woofer: 16 cm (6
5
/16 inches), cone type
Practical maximum output
U.S.A. and Canada 23 W
Europe and Malaysia 28 W (8 ohms, DIN)
50 W (MUSIC)
Other countries 35 W
Reproduction frequency range
28 Hz – 200 Hz
High frequency cut-off frequency
50 Hz – 200 Hz
Phase switch NORMAL, REVERSE
Inputs
Input jacks INPUT 1: Input pin jack
INPUT 2: Input terminals
General
Power requirements
Where purchased
Power consumption
30 W
Dimensions Approx. 205 x 415 x 365 mm (w/h/d)
(8
1
/16 × 16
5
/16 × 14
3
/8 inches)
Mass 8 kg (17 lb 10 oz)
Supplied accessories
Audio connecting cord
(1 phono plug - 1 phono plug) (1)
Speaker cord (2)
Design and specifications are subject to change without
notice.
U.S.A. and Canada
Europe
Malaysia
Other Countries
120 V AC, 60 Hz
220 - 230 V AC, 50/60 Hz
220 - 230 V AC, 50/60 Hz
110 - 120/220 - 240 V AC,
50/60 Hz
110 - 120/220 - 240 V AC,
50/60 Hz
Power requirementsModels
All models
All models
SA-W10
Other
models
All models
To Next Page
Loading...
Need help?
General
