Assembling Main Units
You can control the system using the supplied remote.
Insert two size AA (R6) batteries by matching the + and -
on the batteries. When using the remote, point it at the
remote sensor [] on the system.
"_" You can control TVs,VCRs,LD players, digital satellite
receivers, and MD decks using the supplied remote
See page 59.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. I_Ymg so may cause a malfunc_on.
• If you will not use the remote for an extended period of time,
remove the batteries to avoid possible damage from batte_
leakage and corrosion.
Insert the front speakers into the main units as shown
below. Make sure the front speakers are correctly inserted.
I
t --Front speaker
_Mainunit
®
3
U_
fD
9
To Next Page
Loading...
