SERVICE MANUAL
SPECIFICATIONS
SDM-P82
TFT LCD Color Computer Display
US Model
Canadian Model
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 18.1 inch
Input signal format RGB operating frequency*
Horizontal: 28 – 92 kHz
Vertical: 56 – 85 Hz
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75 Ω, positive
SYNC signal
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75Ω, negative
(Sync on green)
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements 100 – 240 V, 50 – 60 Hz,
Max. 1.2 A
Power consumption Max. 58 W
Operating temperature 5 – 35
°C
Dimensions (width/height/depth)
Display (upright):
Approx. 404 × 406 × 201 mm
(16 × 16 × 8inches)
(with stand)
Approx. 404 × 332.6 × 86.2 mm
(16 × 13
1
/
8
× 3
1
/
2
inches)
(without stand)
Mass Approx. 7.6 kg (16 lb 12 oz) (with
stand)
Approx. 6.3 kg (13 lb 14 oz)
(without stand)
Plug & Play DDC2B
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty shouldbe more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
To Next Page
Need help?
General
