Sony SEN-280 - Page 9

important
• The “MEMORY” indication will go off after a few seconds.
If the “MEMORY” indication has gone off, press MEMORY
again.
• Storing a new station on a preset station number erases
the previously memorized station.
To select a station number of two digits
Press the first digit followed by the second one.
For example: To memorize a station to “10”, press “1” then
“ 0 ”.
3
MEMORY SCAN
G
stop scanning.
Which stations are skipped during memory scanning?
The memory scanning function skips numbers which are not
preset, and also skips stations with a weak signal strength.