C
Cassandra WilliamsSep 6, 2025
How to fix TV reception that is poor on Sony DVD VCR Combo?
- OomorrisSep 6, 2025
If TV reception is poor on your Sony DVD VCR Combo, adjust the TV antenna.
To Next PageTo Next PageHow to fix TV reception that is poor on Sony DVD VCR Combo?
If TV reception is poor on your Sony DVD VCR Combo, adjust the TV antenna.
What to do if my Sony DVD Player won't turn on but the power light is on?
If your Sony DVD-VCR's power is on but it's not operating, it might be due to moisture condensation. Turn the power off, unplug the AC power cord, and let the unit dry for over three hours.
Why is there no picture on my Sony DVD Player?
If you're experiencing a blank screen or picture noise with your Sony DVD Player, try these steps: First, ensure the connecting cords are securely re-connected. Then, verify the connection to your TV and ensure the input selector on your TV is correctly set. If you have set the player to progressive format, but your TV doesn't support it, set “Progressive” to “Off.” Alternatively, set the player to normal (interlace) format. Finally, check the setting and connection of COMPONENT VIDEO OUT jack if the PROGRESSIVE indicator is lit. The connecting cords may be damaged. Also, the disc may be dirty or flawed. You can try connecting your player to your TV’s S-VIDEO input.
Why does the tape start playing as soon as it is inserted in Sony DVD VCR Combo?
If your Sony DVD VCR Combo tape starts playing as soon as it is inserted, the safety tab has been removed. To record on this tape, cover the tab hole.
Why does playback stop automatically on my Sony SLV-D370P?
Playback stops automatically on your Sony DVD VCR Combo while playing discs with an auto pause signal, the player stops playback at the auto pause signal.
How to control other TVs with my Sony DVD Recorder?
If you cannot control other TVs, set your TV’s code number.
Why does the picture have no sound on my Sony SLV-D370P DVD VCR Combo?
If the picture has no sound on your Sony DVD VCR Combo, the tape may be defective. If you made A/V connections, check the audio cord connection.
How to fix a TV program that does not appear on TV screen for Sony DVD VCR Combo?
If a TV program does not appear on the TV screen using your Sony DVD VCR Combo, make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input. Select the correct source with the INPUT SELECT or CH +/– buttons. Select a channel number when recording TV programs; select “L1” or “L2” when recording from other equipment.
Why does my Sony DVD Recorder disc not start from the beginning?
If the disc is not playing from the beginning, it may be due to program play, shuffle play, or repeat play being selected.
Why does my Sony SLV-D370P remote commander not function?
If your Sony DVD VCR Combo remote commander isn't working, make sure of the following: * Point the remote commander at the remote sensor on the DVD-VCR. * Replace all the batteries in the remote commander with new ones if they are weak. * Make sure the TV / DVD·VIDEO switch is set correctly. * Select correctly VIDEO or DVD with the SELECT DVD/ VIDEO button.
General| Brand | Sony |
|---|---|
| Model | SLV-D370P |
| Category | DVD VCR Combo |
| Language | English |
