To set the headset display brightness
1
Turn on the headset.
2
Press the Menu key to open the menu.
3
Press the Next key or the Previous key until the settings icon is selected,
then press the Select key .
4
Press the Next key or the Previous key until the Brightness setting is
selected, then press the Select key .
5
Press the Next key or the Previous key to set a value, then press the Select
key .
Resetting the headset
Reset the headset if it behaves unexpectedly. Resetting the headset removes all
information about paired devices.
To reset the headset
1
Make sure the headset is turned off.
2
Press and hold the power key until Factory reset? appears on the headset
display.
3
Press the Next key or the Previous key to select , then press the Select
key .
You can also reset your headset under the menu option indicated by .
9
This is an Internet version of this publication. © Print only for private use.
To Next Page
Loading...
