SERVICE MANUAL
Ver. 1.1 2007.03
SPECIFICATIONS
9-887-256-02
2007C05-1
© 2007.03
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
SPEAKER SYSTEM
• JIG
When disassembling the set, use the following jig (for
speaker removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
SS-CT100D/WGV100D/ZX80DP/
ZX100D/ZX100DP
SS-ZX80DP SS-ZX100DP
Front Speaker SS-ZX100D
Surround Speaker SS-ZX100D
Front/Surround speaker SS-ZX100D
Speaker system 2-way, bass-reflex type,
magnetically shielded
Speaker units
Woofer 22 cm (8
5
/
8
in.), cone type
Tweeter 5 cm (2 in.), cone type × 2
Nominal impedance 6 ohms
Dimensions (w/h/d) Approx. 308 × 365 ×
480 mm (12
1
/
8
× 14
3
/
8
× 18
7
/
8
in.)
Mass Approx. 9.3 kg (20 lb 9 oz) net per
speaker
Center Speaker SS-CT100D
Speaker system Full range, 2-unit,
bass-reflex type,
magnetically shielded
Speaker units
Full range 8 cm (3
1
/
8
in.), cone type × 2
Nominal Impedance 16 ohms
Dimensions (w/h/d) Approx. 268 × 107 ×
117 mm (10
1
/
2
× 4
1
/
4
× 4
5
/
8
in.)
Mass Approx. 1.6 kg (3 lb 9 oz)
Subwoofer
SS-WGV100D
Subwoofer system 1-way, 1-unit,
bass-reflex type,
magnetically shielded
Speaker units
Subwoofer: 20 cm (7
7
/
8
in.), cone type
Nominal impedance 8 ohms
Dimensions (w/h/d) (Approx.)
281 × 362 × 338.5 mm
(11 × 14
1
/
4
× 13
3
/
8
in.)
Mass (Approx.) 6.8 kg (14 lb 16 oz)
Design and specifications are subject to change
without notice.
US Model
SS-CT100D/ZX80DP/ZX100D
E Model
SS-CT100D/WGV100D/ZX80DP/
ZX100D/ZX100DP
• SS-CT100D is center speaker in FST-ZX80D/ZX100D/LBT-ZX80D/ZX100D.
• SS-WGV100D is subwoofer in FST-ZX100D/LBT-ZX100D.
• SS-ZX100D is front and surround speakers in FST-ZX80D/ZX100D/LBT-ZX80D/ZX100D.
Photo: SS-CT100D Photo: SS-WGV100D Photo: SS-ZX100D
• SS-ZX80DP is package speaker of front and surround speakers in FST-ZX80D/LBT-ZX80D.
• SS-ZX100DP is package speaker of front and surround speakers in FST-ZX100D/LBT-ZX100D.
To Next Page
Need help?
General
