Sony STR-D911 - Adding New Audio to Video Tapes (STR-D711)

With the STR-D711
- > Video signals
! & Audio signals
POWER —> ON
__DAT deck
1 Press viDEo ono. |
2 insert a recorded video tape'into VCR 2 and
set the VCR to the playback mode.
3 At the point where audio dubbing starts,
press the pause button on vcr 2.
4 Press EDIT AUDIO.
EDIT
VIDEO
AUDIO_CP .
AUDIO appears on the display.
5 Select the audio program source with the
function selectors.
6 set ver 1 in the recording mode and then
release the pause mode of VCR 2.
7 Start playback of the selected audio program
source.
Audio dubbing will start.
23