Sony STR-D965 - Adjusting Delay Time; Adjusting the Tone

18
Using Surround Sound
a You can increase the output level of the rear speakers
Although the adjustment range of the rear speakers is
preset, you can shift the range up for increased output.
Hold down the CENTER MODE button while turning on
the receiver, “GAIN [UP]’ appears in the display. The
displayed values remain fixed at -15 to +10 but you can
hear the difference in the actual output.
To reset the rear level adjustment range, repeat this
procedure, “GAIN [NORMAL]’ is displayed.
Adjusting the delay time
You
can
make
the
surround
sound
more
effective
by
delaying
the
output
from
the
rear
speakers
(delay
time).
You
can
adjust
the
delay
time
in
5
ms
steps
within
the
range
of
15
to
30
ms.
For
example,
if
you’ve
placed
the
rear
speakers
in
a
large
room
or
apart
from
your
listening
position,
set
the
delay
time
shorter.
1 Start playing a program source encoded with Dolby
surround sound.
2 Press DPC MODE until the SUR indicator lights up.
3 Press the digital processing control buttons (A/V)
to select the delay time.
The current delay time appears in the display.
4
Press
the
digital
processing
control
buttons
(<
/>)
to adjust the delay time.
Adjusting the tone
You can adjust the tone of the speakers.
Follow
the
procedure
described
in
“Adjusting
the
tone
parameter”
an
page
16.