Sony STR-DA5700ES - Using the Sound Optimizer Function; Sound Optimizer Operation

76
US
• If there is any noise present, the noise may
be different, depending on the sound field
you select.
• “Neo:X (Cinema/Music/Game)” does not
work when signals with a sampling
frequency of 32 kHz are being received.
Using the Sound
Optimizer function
The Sound Optimizer function imparts a sense
of presence and intensity of sound to playback
of high volume sound, regardless of the
volume level of the receiver.
You can enjoy clear and dynamic sound even
at a low volume, for examples, at night.
The optimum effect to suit your environment
is obtained by taking advantage of the “Auto
Calibration” function.
1 Select “Settings” from the
home menu, then press .
2 Select “Audio Settings,” then
press .
3 Select “Sound Optimizer,” then
press .
4 Select “On,” then press .
The Sound Optimizer function is activated.
You can also set the Sound Optimizer function
“On” and “Off” using SOUND OPTIMIZER
on the remote control and the receiver.
Notes
• This function does not work in the following cases.
– “MULTI IN” is selected.
– “2ch Analog Direct” is being used.
– Headphones are being used.
• The receiver may play back signals at a lower
sampling frequency than the actual sampling
frequency of the input signals, depending on the
audio format.