What to do if there is no sound from a specific component on my Sony Stereo Receiver?
If there is no sound from a specific component connected to your Sony Stereo Receiver, verify that the component is correctly connected to the appropriate audio input jacks. Ensure the connecting cords are fully inserted into the jacks on both the receiver and the component. Also, confirm that you have selected the correct component on the receiver.
How to fix poor FM reception on my Sony STR-DE485?
To improve FM reception on your Sony Stereo Receiver, use a 75-ohm coaxial cable to connect the receiver to an outdoor FM antenna. If using an outdoor antenna, ground it against lightning.
What to do if the remote does not function with my Sony STR-DE485?
If the remote isn't working with your Sony Stereo Receiver, aim the remote at the remote sensor, ensure the remote's mode matches the receiver's, and that AV2 is selected as the receiver's command mode. Remove any obstructions between the remote and receiver. If the batteries are weak, replace them. Ensure you've selected the correct function on the remote. If the remote is set to operate the TV only, select a source other than TV before operating the receiver.
Why is there no sound from my Sony Stereo Receiver?
If there is no sound or only a very low-level sound from your Sony Stereo Receiver, ensure the speakers and components are securely and correctly connected, the receiver and all components are turned on, and the MASTER VOLUME control is not set at VOL MIN. Also, check that headphones are not connected and that the muting function is off by pressing MUTING. If a short circuit activated the protective device, turn off the receiver, fix the short-circuit issue, and then turn it back on.
How to balance left and right sound on Sony STR-DE485?
To correct unbalanced or reversed left and right sounds on your Sony Stereo Receiver, adjust the balance parameters in the LEVEL menu.
How to enable surround effect on Sony STR-DE485 Stereo Receiver?
To enable the surround effect on your Sony Stereo Receiver, ensure the sound field function is turned on by pressing the MODE button.
How to improve FM reception on Sony STR-DE485?
To improve FM reception on your Sony Stereo Receiver, use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna.
General| Impedance | 8 ohms |
|---|---|
| Digital Inputs | 1 Optical |
| Type | Stereo Receiver |
| Audio Channels | 5.1 |
| Video Connections | Composite |
| Tuner Type | AM/FM |
| Frequency Response | 10 Hz - 50 kHz |
| Dimensions | 430 x 145 x 298 mm |
| Weight | 17.6 lbs |
| Dimensions (alternate) | 17.1 x 5.6 x 13.8 inches |
| Weight (alternate) | 17.6 lbs |
| Outputs | 2 Audio, 1 Video |
To Next Page
